Ordering custom furniture is about more than choosing cabinet fronts, materials, and hardware. To make sure your kitchen, wardrobe, walk-in closet, or entryway furniture is installed straight, neatly, and without unnecessary adjustments, the apartment needs to be properly prepared before installation.

This is especially important for apartments in Batumi. Uneven walls, corners that are not exactly 90 degrees, floor level differences, high humidity, unusual niches, exposed utilities, and unique layouts in new developments are all fairly common.

In this guide, we’ll explain what should be completed before furniture installation, which work is best finished in advance, and how to prepare the walls, flooring, outlets, appliances, and the room itself before the installation team arrives.

Even well-made furniture can look poor if the room is not properly prepared for installation.

Common issues include:

• walls that are uneven or significantly out of level;
• corners that are not 90 degrees;
• electrical outlets in the wrong locations;
• pipes that interfere with cabinet installation;
• uneven flooring;
• unfinished renovation work;
• excessive construction debris in the room;
• appliances that have not been purchased or do not match the approved design.

As a result, installation takes longer, gaps may appear, furniture may need to be adjusted on-site, and some design solutions may become impossible without additional work.

Proper apartment preparation helps prevent these problems and ensures a cleaner, more precise final result.

It is best to take final measurements after the main rough construction work has been completed.

The ideal time for measurements is when:

• the walls have been plastered;
• the floor has been poured or installed;
• the final floor height is known;
• outlet locations are confirmed;
• water and drain connections are finalized;
• appliance locations are known;
• there are no temporary structures interfering with measurements.

If measurements are taken too early, the dimensions may change after tile installation, wall leveling, or flooring work. This is especially important for built-in wardrobes, floor-to-ceiling kitchens, and furniture installed in niches.

Walls are one of the most important factors in furniture installation.

Before installation, it is best to check:

• whether the walls are level;
• whether they are plumb;
• the corner angles;
• the strength of the wall surface;
• the location of hidden wiring;
• the location of pipes and utility connections.

If the furniture will be installed from wall to wall, uneven surfaces will be especially noticeable. Even a small wall deviation can create a gap along the side or at the top.

For kitchens, it is important that the backsplash area is prepared in advance. If tile will be used, it is best to install it before the kitchen. If a wall panel is planned, its thickness and installation method should be agreed on in advance.

The flooring should be finished before furniture installation.

This is especially important for:

• kitchens;
• built-in wardrobes;
• walk-in closets;
• entryway furniture;
• floor-to-ceiling furniture.

If the furniture is installed before the flooring is finished, problems may later arise with toe-kick height, door clearance, and cabinet front alignment.

Before installation, make sure that:

• the finished flooring is already installed;
• there are no significant height differences;
• baseboards have been removed where necessary or do not interfere;
• the floor surface is clean;
• the floor level is consistent along the entire length of the furniture.

Minor height differences can be compensated for with adjustable legs, but major unevenness should be corrected in advance.

Electrical work should be planned before the furniture is manufactured.

This is especially important for kitchens, TV areas, workspaces, lighting, built-in appliances, and cabinets with interior lighting.

The following locations should be planned in advance:

• refrigerator;
• oven;
• cooktop;
• range hood;
• dishwasher;
• washing machine;
• microwave;
• lighting;
• backsplash outlets;
• charging stations;
• router;
• TV.

One common mistake is placing an outlet directly behind a cabinet, drawer, or built-in appliance. This can make the outlet inaccessible without additional modifications.

Before furniture installation, it is important to make sure the electrical layout matches the approved furniture design.

For kitchens, bathrooms, laundry areas, and furniture designed around appliances, water and drain connections should be checked in advance.

It is important to consider:

• where the sink will be located;
• where the dishwasher will be installed;
• where the washing machine will be installed;
• how the pipes are routed;
• whether shutoff valves remain accessible;
• whether utility lines interfere with drawers;
• whether connections can still be serviced after the furniture is installed.

Important shutoff valves and access panels should never be completely blocked without a way to reach them. If utilities are located in an inconvenient position, this should be taken into account during the design stage.

In some cases, it is better to relocate the connections in advance than to compromise the furniture layout later.

If the furniture is being designed around built-in appliances, the appliance dimensions should be known in advance.

This includes:

• oven;
• cooktop;
• refrigerator;
• dishwasher;
• washing machine;
• range hood;
• microwave.

It is best to provide the furniture manufacturer with the exact appliance models in advance, or at least their precise dimensions.

Why this matters:

• each appliance has its own installation dimensions;
• proper ventilation clearances are required;
• outlets need to be positioned correctly;
• cabinet fronts must open without interference;
• appliances should fit without having to modify or cut the cabinet.

If the appliances are selected after the furniture has already been made, there is a risk that they may not fit properly.

Before the furniture is delivered, make sure that all large components can be brought into the apartment.

Check:

• the width of the entrance door;
• the width of the hallway;
• the size of the elevator;
• turns in the stairwell;
• access to the building entrance;
• whether walkways can be temporarily cleared.

Large components, long countertops, tall side panels, and decorative panels may not fit through a narrow hallway or a small elevator.

If there are any access limitations, it is best to let the furniture manufacturer know in advance. This allows the components to be designed so they can be delivered easily and assembled on-site.

The kitchen requires the most careful preparation.

Before kitchen installation, it is best to complete:

• flooring;
• wall finishing;
• backsplash installation or preparation for a wall panel;
• water and drain connections;
• electrical work;
• appliance selection and purchase;
• outlet installation;
• range hood preparation;
• final room measurements.

It is also important to know in advance where the refrigerator, sink, cooktop, oven, and dishwasher will be located.

The more accurately the kitchen is prepared, the cleaner and more precise the installation will be.

For a wardrobe, it is important to prepare the niche or wall it will be installed against.

Check:

• whether the walls are level;
• the ceiling height;
• whether there are baseboards;
• the location of electrical outlets;
• access to the electrical panel, if it is nearby;
• door clearance;
• whether there are air conditioners, pipes, or wall projections nearby.

If the wardrobe will extend to the ceiling, be sure to account for stretch ceilings, curtain rods, light fixtures, and ventilation grilles.

If the wardrobe is built-in, even small wall irregularities can affect how neat the finished joints and edges look.

Before furniture installation, the room should be cleared as much as possible.

It is best to remove:

• old furniture;
• boxes;
• construction debris;
• personal belongings;
• rugs;
• unnecessary appliances;
• anything that blocks access or walkways.

The installers need enough open space to work, assemble cabinets, trim small components, and install cabinet fronts.

The more open the room is, the faster and neater the installation process will be.

Before furniture installation, try to avoid these common mistakes:

• taking final measurements before the main renovation work is complete;
• changing outlet locations after the furniture design has been approved;
• buying appliances without confirming their dimensions;
• leaving baseboards in areas where built-in furniture will be installed;
• failing to account for access to shutoff valves and electrical panels;
• not checking whether delivery routes are wide enough;
• installing furniture before the finished flooring is in place;
• not mentioning uneven walls in advance;
• leaving the room unprepared for installation.

Most of these issues can be avoided in advance by coordinating the design, final measurements, electrical work, and utility connections before the furniture goes into production.

It is recommended that the customer or a trusted representative be present at the beginning of the installation and during the final inspection of the completed furniture.

At the start of the installation, you can quickly confirm important details such as:

• furniture placement;
• access to electrical outlets;
• appliance-related details;
• cabinet door clearance;
• wall and utility conditions.

After the installation is complete, check:

• cabinet front alignment;
• drawer operation;
• door opening;
• gaps between components;
• wall anchoring;
• countertop condition;
• lighting operation;
• any visible damage.

This helps make the final inspection process smoother and clearer.

Before the installers arrive, make sure:

• the flooring is finished;
• the walls are ready;
• the room is cleared;
• electrical outlets are installed;
• water and drain connections are in place;
• appliances have been purchased or their exact dimensions are known;
• baseboards have been removed where necessary;
• there is clear access to the apartment;
• hallways and access routes are unobstructed;
• construction debris has been removed;
• the furniture design has been approved;
• important utility connections remain accessible.

If everything on this list is ready, the furniture installation will be faster, cleaner, and more precise.

Preparing your apartment for furniture installation is an important step that directly affects the final result.

Even the highest-quality furniture needs the right conditions for installation. Level walls, finished flooring, well-planned electrical work, confirmed appliance dimensions, and a clear workspace help avoid rework, unnecessary gaps, and delays.

If you’re planning to order a kitchen, wardrobe, walk-in closet, entryway furniture, or other custom cabinetry in Batumi, it’s best to discuss apartment preparation with the furniture manufacturer in advance.

This way, your furniture will not only look great, but also be practical, reliable, and installed neatly to fit your space.